| Remove screws. Examine the spring in the tip. If the coiling looks even, and only too long. Rotate 1/4 of a turn the spring that is in the tip. Retest without the screws, if pass, put screws, retest. You also can try compressing the entire spring a little bit, maybe is just a little off. In a german tip, the spring only goes into the plastic aspect of the german tip. If the coiling of the spring has an obvious turn that is too long, try to compress it with the tip of a screwdriver. You also can try compressing the entire spring a little bit.
Last edited by JEC; 06-02-2003 at 10:31 AM.
| 
Linear Mode
