topleft topright

Closed Thread
Results 1 to 5 of 5
  1. #1
    Just Joined Array
    Join Date
    Feb 2008
    Location
    Wisconsin
    Posts
    8

    I need Leon Paul contour system help

    So I took apart my leon paul mask that has a removable bib and all of the parts inside to wash it. After having a lot of issues putting it back together (i completely forgot how the pieces went in) I got it back together, but now it's much looser on my head than it used to be. How do you use the contour system to tighten it? basically when i move my head side to side, the mask stays in one place and doesn't follow my head at all. It's waaaay too loose and it's really annoying!

  2. #2
    Senior Member Array Rockstar44's Avatar
    Join Date
    Nov 2007
    Location
    Hell. Fencing Hell.
    Posts
    574
    Quote Originally Posted by irishfencer777 View Post
    So I took apart my leon paul mask that has a removable bib and all of the parts inside to wash it. After having a lot of issues putting it back together (i completely forgot how the pieces went in) I got it back together, but now it's much looser on my head than it used to be. How do you use the contour system to tighten it? basically when i move my head side to side, the mask stays in one place and doesn't follow my head at all. It's waaaay too loose and it's really annoying!
    Start fencing Epee. You head will get much bigger and the mask will probably fit.
    Been There. Done That. Too Bad.

  3. #3
    Senior Member Array Palisadeur's Avatar
    Join Date
    Mar 2009
    Location
    Ozlandia
    Posts
    420
    Did you wash only the pads, or the elastic as well?
    If you washed the elastic you may need to replace it (if it's really that loose), otherwise; here is a quick diagram of what i've found through experimentation of my own.
    The numbers refer to the velcro tabs.


    Top (forehead) pad
    _____1
    _____|
    _____|
    2----------2

    1 - Adjust for height of cross piece on forehead
    2 - Adjust for distance of forehead from mesh

    Contour fit elastic & cup (back of head piece)
    _____1
    _____|
    _____1
    ___-/--\
    2__|___|__2
    ___-\--/

    1 - Adjust for cup position at back of head
    2 - Adjust for tightness on head (in conjunction with Top-pad-2)

    Hope this helps.

    p.s. ASCI rocks.
    .
    I suppose it is tempting, if the only tool you have is a hammer, to treat everything as if it were a nail.
    ~ Abraham Maslow

  4. #4
    Senior Member Array damianip's Avatar
    Join Date
    Dec 1999
    Location
    PA, USA
    Posts
    1,360
    I echo your post script.

    That was, indeed, awesome ASCII. You are an old school master.

    Paolo
    "He is a man of splendid abilities but utterly corrupt. He shines and stinks like rotten mackerel by moonlight." "Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin to slit throats."

  5. #5
    Just Joined Array
    Join Date
    Feb 2008
    Location
    Wisconsin
    Posts
    8
    Yeahh I'm not going to fence epee. I'm a high school fencer and my head isn't going to grow. It wasn't as loose as I thought, but I adjusted the pad and that helped a lot. i think I just had it slightly off in there. The elastic is fine, and the mask fits fine now. Thanks a ton!

Similar Threads

  1. Replies: 0
    Last Post: 01-10-2010, 04:28 PM
  2. Replies: 9
    Last Post: 12-05-2006, 07:41 PM
  3. Replies: 16
    Last Post: 03-25-2006, 03:10 AM
  4. Latest Leon Paul Contour Fit Mask at USA Nationals.
    By Barry Paul in forum Armory - Q&A
    Replies: 11
    Last Post: 07-23-2005, 02:23 PM
  5. Leon Paul Contour fit Mask
    By Delmont in forum Armory - Q&A
    Replies: 16
    Last Post: 12-07-2003, 06:27 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30