topleft topright

Closed Thread
Results 1 to 19 of 19
  1. #1
    Member Array
    Join Date
    May 2005
    Posts
    30

    cannot post anything

    I keep on getting the following when i wanted to post new thread in other area other than on comments & suggestions

    You did not specify a username for your post.

  2. #2
    That Guy Array Craig's Avatar
    Join Date
    Dec 1999
    Location
    Atlanta, GA
    Posts
    6,267
    Blog Entries
    18
    You're posting a URL or email address with the post which looks spammy if you don't have a number of posts already.

    Craig

  3. #3
    Member Array
    Join Date
    May 2007
    Posts
    36
    I am having the same problem. I have to cut the message to smaller messages. Sometimes it is getting through and sometimes not.

  4. #4
    Just Joined Array sirona7's Avatar
    Join Date
    Aug 2004
    Location
    Boston, MA, USA
    Posts
    6
    I'm getting the same message and fear that I've posted 20 versions of the same reply because nothing seemed to be posting. I logged out and back in. Tried to post again and got a message that I'd posted the identical message within 5 minutes! Sorry for spamming--that was never my intention.
    vigilantibus non dormientibus

  5. #5
    Member Array
    Join Date
    May 2007
    Posts
    36
    help anyone?

  6. #6
    Member Array
    Join Date
    Jan 2007
    Posts
    95
    am having the same problem with "you did not specify a username for your post"

  7. #7
    Senior Member Array larkmaj's Avatar
    Join Date
    Apr 2005
    Location
    South Shore
    Posts
    958
    Quote Originally Posted by cfd784 View Post
    am having the same problem with "you did not specify a username for your post"
    It would be for this reason:
    Quote Originally Posted by Craig View Post
    You're posting a URL or email address with the post which looks spammy if you don't have a number of posts already.

    Craig
    Meaning you were probably trying to post a link. One of the spam tools on this board is a minimum required number of posts for a user before you can post a link.

  8. #8
    Member Array
    Join Date
    Jan 2007
    Posts
    95
    i had a link in the post at first but took that out and still could not post. I can post to threads other sections, just not in Tournaments and CAmps.

  9. #9
    Member Array
    Join Date
    May 2007
    Posts
    36
    I didnt even post a link....

  10. #10
    Member Array
    Join Date
    Jan 2007
    Posts
    95
    its just puzzling that i can reply to threads and post in the tournaments results section but just not in the tournament/camps section. does anyone know why this might be.

  11. #11
    ಠ_ಠ Array
    Join Date
    Feb 2003
    Posts
    5,958
    Blog Entries
    25
    there might be a specific restriction on that section.

  12. #12
    Member Array
    Join Date
    Jan 2007
    Posts
    95
    what restrictions are there for posting in the tournaments and camps section??

  13. #13
    Gav
    Gav is online now
    Moderator Array Gav's Avatar
    Join Date
    Aug 2000
    Location
    Scotland
    Posts
    6,559
    Quote Originally Posted by cfd784 View Post
    what restrictions are there for posting in the tournaments and camps section??
    Same as the rest of the board.

    If you want to post something and are currently not able to why not contact a moderator and ask if they will do it for you?

  14. #14
    Member Array
    Join Date
    Jan 2007
    Posts
    95
    thanks, will do that. i was able to finally post to the tournaments section after many tries, one suggestion was to shorten the post, which i had tried before but kept trying. is there a limit to the size of posts in tournaments/camps?

  15. #15
    Member Array
    Join Date
    May 2007
    Posts
    36
    the problem is not only in tournaments etc it seems to be some malfunction of this system. It is some irational behaviour. However, I noticed too that short messages have higher probability of success. No one seems to give support here for this problem.

  16. #16
    Senior Member Array rory's Avatar
    Join Date
    Apr 2003
    Location
    Ask.
    Posts
    529
    Yeah, the tech support's awful here for the amount we pay to use the forum.
    Oh, wait.... it's free.

    Craig and the others do this because they want to - have a little patience.
    "First, second, third, dead f***in' last." - Greg Glassman

  17. #17
    Gav
    Gav is online now
    Moderator Array Gav's Avatar
    Join Date
    Aug 2000
    Location
    Scotland
    Posts
    6,559
    Quote Originally Posted by amia View Post
    the problem is not only in tournaments etc it seems to be some malfunction of this system. It is some irational behaviour. However, I noticed too that short messages have higher probability of success. No one seems to give support here for this problem.
    What?

    It's spelled out earlier in the thread.

    Stop trying to insert links (emails, web addresses - whatever) until you have been around the board a bit longer. The idea is that you must contribute before you get to post such things. It's an anti spam measure.

    If there is something that is stopping you from posting send what it is in a PM to a moderator (and I might just know one of them...) and they will be happy to post it on your behalf.

  18. #18
    That Guy Array Craig's Avatar
    Join Date
    Dec 1999
    Location
    Atlanta, GA
    Posts
    6,267
    Blog Entries
    18
    Quote Originally Posted by amia View Post
    the problem is not only in tournaments etc it seems to be some malfunction of this system. It is some irational behaviour. However, I noticed too that short messages have higher probability of success. No one seems to give support here for this problem.
    The main problem that I see is:

    - Someone attempts to post a link with their first (or third) post. This triggers spam filter.
    - Person attempts to post another 10 or more times with link, then without link
    - by then they are "locked out" since multi-posting the same content is another spam trigger - makes you look like a web-bot

    If you are having trouble posting something specific, best to send a PM.

    Cheers,
    Craig

  19. #19
    Member Array
    Join Date
    May 2007
    Posts
    36
    Quote Originally Posted by Craig View Post
    The main problem that I see is:

    - Someone attempts to post a link with their first (or third) post. This triggers spam filter.
    - Person attempts to post another 10 or more times with link, then without link
    - by then they are "locked out" since multi-posting the same content is another spam trigger - makes you look like a web-bot

    If you are having trouble posting something specific, best to send a PM.

    Cheers,
    Craig
    Quote Originally Posted by Gav View Post
    What?

    It's spelled out earlier in the thread.

    Stop trying to insert links (emails, web addresses - whatever) until you have been around the board a bit longer. The idea is that you must contribute before you get to post such things. It's an anti spam measure.

    If there is something that is stopping you from posting send what it is in a PM to a moderator (and I might just know one of them...) and they will be happy to post it on your behalf.
    It does not explain it. As I wrote I did not send links...
    In either case I managed to send some messages (short??) and some not.
    Gav, Craig I know that your work is free and I appreciate it but I did expect that since may till now someone maintaing this site will respond. Sorry if this is too demanding. I do suggest that a moderator link will appear for each forum (I thought about it but did not know who was the moderator of that group). Anyway, I did find a way around it but I thought you should be aware of the problems in your system since other new comers will not be thrown away because of it and could increase this helpful community.

Similar Threads

  1. Polls! And how to get them to post at the same time as the actual post?
    By Black Jeebus in forum Comments & Suggestions
    Replies: 6
    Last Post: 05-01-2007, 10:39 PM
  2. I cant post
    By Chî in forum New to Fencing
    Replies: 3
    Last Post: 02-24-2007, 12:16 AM
  3. first post
    By BraveHardt in forum New to Fencing
    Replies: 11
    Last Post: 05-29-2006, 03:47 AM
  4. mis-post
    By TeskoSuicide in forum Fencing Discussion
    Replies: 0
    Last Post: 12-27-2004, 08:59 PM
  5. the Post
    By Foilboy in forum Armory - Q&A
    Replies: 6
    Last Post: 08-26-2003, 06:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30