Body Cord Help

[weapon7]

I have a qustion regarding Ulhman foil body cords.
When you take the weapon end apart how do you remove the wire from the pins? I have often repared standard two prong cords and all you have to do is unscrew the small screw and remove the wire. I can get that far with out any trouble with the Ulhman that is until I try to remove the mire. It appears to still be held in somehow.
Any help would be appriciated. Thank you in advance.

[ 12-03-2001: Message edited by: weapon7 ]</p>

[neevel]

Once you've got the body of the plug taken apart, there's a screw at the back of each pin that holds the wire in place. The screws on the outside just hold the body together: you need to remove first the retainer clip, and then the body screws. The two halves of the body will come apart.

-Dave