My flick-loving Favero Full-Arm-05...Which FIE timings does it use?

[Premit Noctem]

I recently purchased a new Full-Arm-05 (less than a month ago). It is very permissive with flicks, leading me to wonder if its chip does not have the latest timings. The chip in the machine is labeled "ARM05-2", and there is a black and white sticker on the outside back that says "Gen 2005".

From what I have gotten from Favero's web site, I believe that the machines with the latest timings have chips labeled "T2005..." and red stickers with "T2005" on the outside of the machine.

I suspect that my new machine has the old timings. Based on the above, does anyone know with certianty which timings I'm working with?

Thank you,
Premit Noctem

[ReverseLunge]

I recently purchased a new Full-Arm-05 (less than a month ago). It is very permissive with flicks, leading me to wonder if its chip does not have the latest timings. The chip in the machine is labeled "ARM05-2", and there is a black and white sticker on the outside back that says "Gen 2005".

From what I have gotten from Favero's web site, I believe that the machines with the latest timings have chips labeled "T2005..." and red stickers with "T2005" on the outside of the machine.

I suspect that my new machine has the old timings. Based on the above, does anyone know with certianty which timings I'm working with?

Thank you,
Premit Noctem

You can switch it to the new timings using a certain button sequence and holding down certian buttons etc. Someone here will tell you. Just stick around.

[D+F+P=Hadouken!]

You can switch it to the new timings using a certain button sequence and holding down certian buttons etc. Someone here will tell you. Just stick around.

yeah, Down+Forward+punch

[prototoast]

THe Favero boxes have 2 settings... if the weapon setting is flashing, it's on the new timing, if it's not flashing, it's on the old timing.

[rsy]

I have not used the Full Arm 05, but our club has the 01 model with an upgraded 2 program chip. To switch between old and new timings you press & hold the "2nd vers" button and the foil LED will begin to blink. That means it is on the new timing. See if that works for yours.

-r

[Premit Noctem]

Thank you, I will give it a try.

Premit Noctem

[oso97]

ACtually, there are two chips for the Favero 01's and 05's with the new timings.

One chip has both the old and the new on it - for that one you can change back and forth with the above mentioned way, and tell with the blinking.

The other chip only has the new timings on it.

Each has a specific sticker - but I don't know what they look like.